Energy harvesting from water flow by using piezoelectric materials

As a promising energy-harvesting technique, an increasing number of researchers seek to exploit the piezoelectric effect to power electronic devices by harvesting the energy associated with water flow. In this emerging field, a variety of research themes attract interest for investigation; these include selection of the excitation mechanism, oscillation structure, piezoelectric material, power management interface circuit, and application. Since there has been no comprehensive review to date with respect to the harvesting of water flow using piezoelectric materials, herein relevant work in the last 25 years is reviewed. To ensure that key aspects of the water-flow energy harvester are overviewed, they are discussed in the context of energy-flow theory, which includes the three stages of energy extraction, energy conversion, and energy transfer. The development of each energy-flow process is reviewed in detail and combined with meta-analysis of the published literature. Correlations between the harvesting processes and their contribution to the overall energy-harvesting performance are illustrated, and directions for future research are also proposed. In this review, a comprehensive understanding of water-flow piezoelectric energy harvesting is provided and it is aimed to guide future research and the development of piezoelectric harvesters for water-flow-powered devices is promoted

Orienting anisometric pores in ferroelectrics:Piezoelectric property engineering through local electric field distributions

Ferroelectrics are a technologically important class of materials that are used in actuators, sensors, transducers, and memory devices. Introducing porosity into these materials offers a method of tuning functional properties for certain applications, such as piezo- and pyroelectric sensors and energy harvesters. However, the effect of porosity on the polarization switching behavior of ferroelectrics, which is the fundamental physical process determining their functional properties, remains poorly understood. In part, this is due to the complex effects of porous structure on the local electric field distributions within these materials. To this end, freeze-cast porous lead zirconate titanate (PZT) ceramics were fabricated with highly oriented, anisometric pores and an overall porosity of 34 vol.%. Samples were sectioned at different angles relative to the freezing direction, and the effect of pore angle on the switching behavior was tracked by measuring simultaneously the temporal polarization and strain responses of the materials to high-voltage pulses. Finite-element modeling was used to assess the effect of the pore structure on the local electric field distributions within the material, providing insight into the experimental observations. It is shown that increasing the pore angle relative to the applied electric field direction decreases the local electric field, resulting in a reduced domain-wall dynamic and a broadening of the distribution of switching times. Excellent longitudinal piezoelectric (d33 = 630 pm/V) and strain responses (Sbip = 0.25% and Sneg = 0.13%, respectively), comparable to the dense material (d33 = 648 pm/V, Sbip = 0.31%, and Sneg = 0.16%), were found in the PZT with anisometric pores aligned with the poling axis. Orienting the pores perpendicular to the poling axis resulted in the largest reductions in the effective permittivity (εσ33= 200 compared to εσ33= 4100 for the dense PZT at 1 kHz), yielding the highest piezoelectric voltage coefficient (g33 = 216×10−3 Vm/N) and energy-harvesting figure of merit (d33g33 = 73×10−12 m2/N). These results demonstrate that a wide range of application-specific properties can be achieved by careful control of the porous microstructure. This work provides an understanding of the interplay between the local electric field distribution and polarization reversal in porous ferroelectrics, which is an important step towards further improving the properties of this promising class of materials for sensing, energy harvesting, and low-force actuators

Breakdown in the case for materials with giant permittivity?

Breakdown in the Case for Materials with Giant Permittivity

High piezoelectric sensitivity and hydrostatic figures of merit in unidirectional porous ferroelectric ceramics fabricated by freeze casting

High performance lead zirconate titanate (PZT) ceramics with aligned porosity for sensing applications were fabricated by an ice-templating method. To demonstrate the enhanced properties of these materials and their potential for sensor and hydrophone applications, the piezoelectric voltage constants hydrostatic parameters and AC conductivity as a function of the porosity in directions both parallel and perpendicular to the freezing temperature gradient were studied. As the porosity level was increased, PZT poled parallel to the freezing direction exhibited the highest coefficients, and hydrostatic figures of merit compared to the dense and PZT poled perpendicular to the freezing direction. This work demonstrates that piezoelectric ceramics produced with aligned pores by freeze casting are a promising candidate for a range of sensor applications and the polarisation orientation relative to the freezing direction can be used to tailor the microstructure and optimise sensitivity for sensor and hydrostatic transducer applications